Aluminum 6063-T52 Rectangular Bar, 0.25" Thick, 3" Width, 72" Length

Aluminum 6063-T52 Rectangular Bar, 0.25" Thick, 3" Width, 72" Length Review

Aluminum 6063-T52 Rectangular Bar, 0.25" Thick, 3" Width, 72" Length Feature

• Good resistance to general corrosion
• Easily welded or brazed
• Use for door and window frames, electrical components and conduit, railings and furniture, heatsinks
• Good extrudability and high quality surface finish
• Min 22 ksi tensile strength

Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. It is easily welded or brazed by various commercial methods (caution: direct contact by dissimilar metals can cause galvanic corrosion). Since 6063 is a heat-treatable alloy, strength in its -T6 condition can be reduced in the weld region. Selection of an appropriate filler alloy will depend on the desired weld characteristics. Consult the Material Safety Data Sheet (MSDS) for proper safety and handling precautions when using alloy 6063. Alloy 6063 offers excellent response for anodizing in its -T5, -T52 , -T53 (“matte finish”), -T54, -T6 (“lustrous” finish) tempers. The most common methods are clear, clear and color dying, and bright dipping and hard coat. Bright dipping provides an economical alternative to mechanical polished finishes while offering improved surface durability.

Bunting Bearings ES0013 SOLID x 1 5/8" OD x 6 1/2" Length Powdered Metal SAE 841 Solid Bar

Bunting Bearings ES0013 SOLID x 1 5/8" OD x 6 1/2" Length Powdered Metal SAE 841 Solid Bar Review

Bunting Bearings ES0013 SOLID x 1 5/8" OD x 6 1/2" Length Powdered Metal SAE 841 Solid Bar Feature

• Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications
• Large Working Temperature Range, 10 F to 220 F
• Conformance to ASTM chemical and physical properties
• Non Magnetic
• Corrosion resistant

Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.

Brass C360 Rectangular Bar, ASTM-B16, 1/8" Thick, 1" Width, 36" Length

Brass C360 Rectangular Bar, ASTM-B16, 1/8" Thick, 1" Width, 36" Length Review

Brass C360 Rectangular Bar, ASTM-B16, 1/8" Thick, 1" Width, 36" Length Feature

• ASTM-B16
• Standard screw machine brass
• C 360
• Free Machining
• Easily plated, soldered and brazed.

Brass Rod C360 ASTM-B16 The accepted standard for screw machine work, leaded Brass C360 has a high zinc content (up to 37 percent) and a small inclusion of lead that imparts a free-cutting quality to this alloy. It finishes well and is easily plated, soldered and brazed.

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1.25" Width, 72" Length

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1.25" Width, 72" Length Review

Aluminum 6061-T6511 Rectangular Bar, 0.375" Thick, 1.25" Width, 72" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Bunting Bearings ET0610 3/4" Bore x 1 1/4" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar

Bunting Bearings ET0610 3/4" Bore x 1 1/4" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar Review

Bunting Bearings ET0610 3/4" Bore x 1 1/4" OD x 6 1/2" Length Powdered Metal SAE 841 Cored Bar Feature

• Self Lubricating Bronze Bearing; SAE 30 Oil provides ideal lubrication in most applications
• Large Working Temperature Range, 10 F to 220 F
• Conformance to ASTM chemical and physical properties
• Non Magnetic
• Corrosion resistant

Bunting Bearings offers a complete line of stock plain bearings, flange bearings and washers made of P/M bronze. Bunting sintered bronze stock bearings have long conformed to ASTM chemical and physical properties, and are the first to include all ASTM standard sizes to ASTM recommended dimensions and tolerances. After forming, sintering and sizing, the bearings are vacuum impregnated with SAE 30 oil that provides lubricant which is metered from the bearing to the shaft during rotation. Standard off-the-shelf oil impregnated bronze bearings should function satisfactorily in temperatures ranging from 10°F to 220°F.

Aluminum 6061-T6511 Square Bar, 0.1875" Thick, 0.1875" Width, 36" Length

Aluminum 6061-T6511 Square Bar, 0.1875" Thick, 0.1875" Width, 36" Length Review

Aluminum 6061-T6511 Square Bar, 0.1875" Thick, 0.1875" Width, 36" Length Feature

• Excellent corrosion resistance
• Versatile for medium to high strength requirements
• Use for transportation components, recreation products, machinery and equipment
• Good finishing characteristics
• Min 38 ksi tensile strength

Aluminum 6061 is one of the most widely used alloys in the 6000 series. This standard structural alloy, one of the most versatile of the heat-treatable alloys, is popular for medium to high strength requirements and has good toughness characteristics. Alloy 6061 has excellent corrosion resistance to atmospheric conditions and good corrosion resistance to seawater. This alloy also offers good finishing characteristics and responds well to anodizing; however, where cosmetic appearance is critical, consider the use of alloy 6063. For screw machine applications, alloy 6061 has adequate machinability characteristics in the heat-treated -T6/-T6511 condition. Chips from machining (particularly turning and drilling) can be difficult to break in the -T6/-T6511 temper condition. Chip breakers are recommended, and special machining techniques (i.e. peck drilling) can improve chip formation.

Aluminum 6063-T52 Rectangular Bar, 0.75" Thick, 1" Width, 36" Length

Aluminum 6063-T52 Rectangular Bar, 0.75" Thick, 1" Width, 36" Length Review

Aluminum 6063-T52 Rectangular Bar, 0.75" Thick, 1" Width, 36" Length Feature

• Good resistance to general corrosion
• Easily welded or brazed
• Use for door and window frames, electrical components and conduit, railings and furniture, heatsinks
• Good extrudability and high quality surface finish
• Min 22 ksi tensile strength

Alloy 6063, one of the most popular alloys in the 6000 series, provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking. It is easily welded or brazed by various commercial methods (caution: direct contact by dissimilar metals can cause galvanic corrosion). Since 6063 is a heat-treatable alloy, strength in its -T6 condition can be reduced in the weld region. Selection of an appropriate filler alloy will depend on the desired weld characteristics. Consult the Material Safety Data Sheet (MSDS) for proper safety and handling precautions when using alloy 6063. Alloy 6063 offers excellent response for anodizing in its -T5, -T52 , -T53 (“matte finish”), -T54, -T6 (“lustrous” finish) tempers. The most common methods are clear, clear and color dying, and bright dipping and hard coat. Bright dipping provides an economical alternative to mechanical polished finishes while offering improved surface durability.

TIN-1-lb.-Ingot-99+%-Pure

TIN-1-lb.-Ingot-99+%-Pure Review

"

Pure Tin (99%+) Ingot Form, Each Ingot is Approx 3.5 pounds. You have to order at least 4 pounds to get a full ingot like in the picture!

Sold By the Pound
ie. 1 Quantity = 1 Pound
Physical Information
Atomic Number_ _50_
Relative Atomic Mass (12C=12.000)_ _118.71_
Melting Point/0F_ _450_
Boiling Point/0F_ _4100_
Density_ _7.29_

Aluminum 6061-T6 Rectangular Bar, ASTM-B211, 3/8" Thick, 1/2" Width, 36" Length

Aluminum 6061-T6 Rectangular Bar, ASTM-B211, 3/8" Thick, 1/2" Width, 36" Length Review

Aluminum 6061-T6 Rectangular Bar, ASTM-B211, 3/8" Thick, 1/2" Width, 36" Length Feature

• ASTM-B211
• Good formability with medium strength
• Resists stress cracking
• High corrosion resistance
• Solution heat treated and artificially aged

Aluminum Bar Type 6061-T6 ASTM-B211 - This Aluminum/Silicon/Magnesium alloy has been solution heat treated and artificially aged. Machines well with excellent welding qualities. Resists stress cracking. Good formability with medium strength and high corrosion resistance. Used in many heavy-duty structures, particularly for transportation and marine applications.